Install Windows XP on a netbook (USB stick. You can still install Windows XP (or many Linux distributions. Liliputing’s primary sources of revenue are. 3 - Now we will create a bootable Windows XP install flash drive. - We are going to use a program called Win2Flash for this (free but adware). Run WinToFlash and click the green check mark to start the Wizard. Enter the path to the XP folder you created earlier and then the path to your USB drive.

Tutorials >How to setup Windows XP from USB. Especially if you've had Linux or some other. You want to install Windows to. Proceed with the installation. Step 6: Continue Windows XP Setup from Hard disk. Reboot your system. Download Adobe Reader 10 Offline Installer more. Unplug USB drive during post stage. Change your BIOS settings back to boot from hard disk again as needed. You can now continue to finish setting up Windows XP. Note: The above guide works with Windows XP only.

• The previous methods of creating the bootable USB drive for Windows XP involve numbers of steps and take a lot of time to complete. • You’ve to use the similar Operating System to prepare the USB disk i.e if you want to prepare your bootable USB drive for Windows XP, you’ll have to use Windows XP operating system in order to apply the preparation method. The similar condition is applicable when preparing the bootable USB drive for Windows 7. • Those methods do not have any option to prepare the bootable stick in such a way that it would install both Windows XP and Windows 7 after spending one time effort. But we’ve found an awesome free utility which comes across drawbacks and allows you to create a Multiboot USB drive to install Windows XP and Windows 7 from the same USB drive. No need to prepare your USB stick separately.

Even the tool works in both Windows XP and Windows 7. How to Create Multiboot USB Drive for Windows 7 and XP Creating the multiboot USB drive is so easy and involves four simple steps. Before getting into the process, make sure that the USB drive that you do have, is minimum 4 GB of volume (recommended 8 GB) and formatted with FAT32 file system.

Once you are ready, and extract at any location of your computer. Now, follow the steps below. • Insert the formatted USB drive in the USB post of your computer and run the WinSetupFromUSB_1-0-beta7.exe. • Make sure that the utility has detected your USB drive.

• Now, enable the option Windows 2000/XP/2003 Setup selecting the check box and browse to the Windows XP installation file location. Next, enable the option Vista/7/Server 2008 Setup/PE/RecoveryISO and browse to the Windows 7 installation files’ location. In both cases, if you have the ISO images, extract them by WinRar or 7-Zip. • Click the Go button to get started. Wait for some time and your multi-boot USB stick will ready within a while.

It may take several minutes. Though we have discussed the procedure for only Windows XP and Windows 7, you can also add Windows Vista as well as Linux in the same removable drive and use it to install your preferred operating system at your PC. Nagaraj about the first problem just use part one. Naruto Vs Pain Full Subtitle Indo there.

Part two is if the setup doesn’t load the local partition where the installation of XP takes place. About the second problem just choose the local HDD on which you are installing as boot device from BIOS. You’ve made the USB HDD to be boot device. It is better to use the Boot Manager (F8 on ASUS F9 on newer HP F12 on Toshiba, F11 on Acer etc) only when choosing what to install and not doing it in BIOS because you need to change the boot device to local disk drive after loading the setup files and restarting. Oh my God Vince and Momchil, do you think that Jon has the first ever laptop created? Even on the oldest computer that supports XP, the installation shouldn’t take more than an hour (a couple of hours tops) which is not *that* bad if it’s the only thing you got. Anyway, I know that you said your CD-ROM is dead Jon, but this may help others that can’t boot from USB (not supported in BIOS).

Just download “PLoP Boot Manager”, burn it on a CD – ‘coz it also has a “live” version (or install it if it’s your own PC) and than you can pretty much boot from everything (Network, USB, Other Partitions, etc). I read elsewhere that the USB flashdrive should be first formatted in NTFS. I really wonder as to why its such an advantage to have both XP & Win7 on one USB drive, USB drives are now cheap & surely 2 OSs is just silly. Also it's recommended elsewhere to first remove some restrictions on the downloaded iso by using a SW removal tool (I'm sure you know about this); so does this approach work on a modified ISO? Star Plus Serials Desirippers. Finally I have raed that saving to DVD is better than to USB flashdrive because the speed of data transfer is much improved. Personally I prefer USB drives to writable DVDs & a small speed difference would not trouble me – but its worth asking?