Our Vex team currently has this hardware and firmware: -vex cortex and normal joystick controllers -Latest version of everything (vex, robotc, all cortex & joystick firmware, vexnet 2.0 & keys) -OLD programming cable (full orange) I have not figured out how to program wirelessly over vexnet. I have followed the instructions, but I get lots of different error messages. Do I need the newest programming cable to make this work? Am I missing drivers that don't come automatically with robotc?

VEX USB serial port (COM3) - there are 1 drivers found for the selected device, which you can download from our website for free. Download Kamus Arab Melayu Free. Select the driver needed and press.

Any help or links to guides are appreciated. Unable to read file system table of contents from robot.

VEX USB-to-Serial by Prolific. VEX USB-to-Serial is used by 1 user of Software Informer. You can check BIXOLON Virtual Com for USB Driver. A VEX USB-to-Serial. You will learn how to install the Prolific USB-to-Serial Cable driver. For use with VEX Robotics Systems USB-to-Serial Driver.

-(Paraphrased) unable to tell if connected to joystick or controller. -Long error with 5 parts because it can't tell what I'm trying to do so it gives me different instructions for different scenarios -Just tons of different errors about not being able to detect the controller on the other side of the programming dongle. Can't remember any others but I'm pretty sure it's the programming cable because the errors don't change whether I'm using the Vexnet 2.0 keys or direct USB connection between joystick and robot. I don't know how to link the joysticks to the cortex without a USB to USB cable. You may have to go out and buy one. Though, it isn't too hard to find one.

Having a USB to USB also helps because I find it better to install the firmware via USB. Reinstall all the firmware.

(For Cortex it's MasterCPU then RobotC). Don't install your program yet. Just unplug the controller or cortex from the computer, then put the orange USB to USB into the controller on one end and the other end into the Cortex. Turn either the controller or cortex on (Doesn't matter which, but personally I turn both on to be sure). Let it blink and stuff for like 10 seconds, then unplug and turn off. Plug your Vexnet keys in and they should link.

Then just program.

Hi ashandtony, We're sorry that you have encountered this issue. To help isolate what is causing this problem, please connect your Robot Brain to your computer via the USB cable, and turn on the Robot Brain (it must have a Robot Battery installed). How To Install Xpi Inspector Gadget. On Windows 7+, when in the Start menu, start typing 'Device Manager', then double click on the program when it comes up in the search results. In Device Manager, please scroll down to the 'Ports (COM & LPT)' section, and click the expand this group. When the VEX IQ Robot Brain drivers are correctly installed, it will show up here as 'VEX USB serial port (COM#)', where the # will be in between about 1 and 20. The COM# will be different on each computer.